JB60T — 60-Channel BNC Junction Box

Name: JB60T — 60-Channel BNC Junction Box
Brand: TIERA
SKU: JB60T

60 BNC channels — a chassis build is also available above 32 channels.

SKU: JB60T

Buy on store → Book demo

Used in

Structural TestingModal AnalysisAcoustic TestingDefence & Aerospace

At a glance

●60 channels, 5 rows × 12, continuous numbering
●Screw-fixed cover as standard
●Chassis build (hinged, lockable, zoned) available as a configuration option
●BNC female-to-female panel-mount, one per channel
●±0.1 dB flatness, 10 Hz–20 kHz
●1-year warranty

Specifications

Channels	60
Panel layout	5 rows × 12, continuous numbering
Form factor	T-series build as standard; chassis build (hinged/lockable/zoned) offered as an option
Connector	BNC, female-to-female, panel-mount, ×60
Cover	Screw-fixed flat top panel, no hinge, standard — hinged/lockable optional
Mounting	Rubber feet, standard — rack ears or castor stand optional
Cable glands	Not visible in this model's source image (side wall not shown); zone-dependent on a zoned build
Zoning	None on the standard build — zoned grouping available on request; 60 does not divide evenly into the 16-channel zone width used on JB64T, so zone width would need confirming with the customer's sensor layout
Footprint	Floor/large-bench enclosure (indicative — not a measured dimension)
Flatness	±0.1 dB, 10 Hz – 20 kHz
Contact resistance	≤ 5 mΩ
Insulation resistance	≥ 1000 MΩ
Warranty	12 months

The JB60T panel carries channels 01–60 in five rows of twelve, continuously numbered, on the same black powder-coated, screw-fixed, flat top panel as JB48T and every smaller studio-rendered T-series model. No zone dividers, no hinge, no lock, on the standard build.

At 60 channels, the chassis-configured build (hinged lid with lid-support stay, zoned panel, per-zone glands, optional castor stand) is available on request, the same as JB48T and JB80T. One detail worth flagging at this specific channel count: the 64-channel tender configuration groups its panel into 16-channel zones, but 60 does not divide evenly by 16 — a zoned JB60T would need its zone width confirmed against the customer’s actual sensor layout rather than assumed to copy JB64T’s 4×16 grouping.

Electrical specification

Parameter	Value
Flatness	±0.1 dB, 10 Hz – 20 kHz
Contact resistance	≤ 5 mΩ
Insulation resistance	≥ 1000 MΩ
Connector	BNC, female-to-female, panel-mount bulkhead

This is a passive assembly with no active device in the signal path. THD and noise-floor figures (≤ 0.001% / ≤ −120 dBV, reported on request) are null-result measurements confirming the assembly adds no detectable distortion or noise above a calibrated analyser’s own floor — not a spec the box “achieves” the way an active instrument would.