TIERA Book demo ->

JB48T — 48-Channel BNC Junction Box

48 BNC channels, 4 rows × 12, screw-fixed as standard — chassis build available.

SKU: JB48T

Used in
Structural TestingModal AnalysisAcoustic TestingDefence & Aerospace
JB48T — 48-Channel BNC Junction Box
At a glance
  • 48 channels, 4 rows × 12, continuous numbering
  • Screw-fixed cover as standard
  • Chassis build (hinged, lockable, zoned) available as a configuration option
  • BNC female-to-female panel-mount, one per channel
  • ±0.1 dB flatness, 10 Hz–20 kHz
  • 1-year warranty
Specifications
Channels 48
Panel layout 4 rows × 12, continuous numbering
Form factor T-series build as standard; chassis build (hinged/lockable/zoned) offered as an option
Connector BNC, female-to-female, panel-mount, ×48
Cover Screw-fixed flat top panel, no hinge, standard — hinged/lockable optional
Mounting Rubber feet, standard — rack ears or castor stand optional
Cable glands Not visible in this model's source image (side wall not shown); 1 gland per zone on a zoned build (see JB64T)
Zoning None on the standard build — zoned grouping available on request
Footprint Floor/large-bench enclosure, two-hand lift (indicative — not a measured dimension)
Flatness ±0.1 dB, 10 Hz – 20 kHz
Contact resistance ≤ 5 mΩ
Insulation resistance ≥ 1000 MΩ
Warranty 12 months

The JB48T panel carries channels 01–48 in four rows of twelve, continuously numbered with no zone dividers, on a black powder-coated steel enclosure. Its standard cover is the same screw-fixed, flat top panel construction as every smaller studio-rendered T-series model — no hinge, no lock. There is no difference in build convention between this unit and JB24T; the difference is scale.

Forty-eight channels is where TIERA starts offering the chassis-configured alternative described on the family page: a hinged, lockable lid with a folding lid-support stay, the panel divided into zones with one cable gland per zone, dual-face port marking, and an optional wheeled castor stand. That build is a configuration option available from this channel count up, realised as standard on the 64-channel tender unit, JB64T.

Electrical specification

ParameterValue
Flatness±0.1 dB, 10 Hz – 20 kHz
Contact resistance≤ 5 mΩ
Insulation resistance≥ 1000 MΩ
ConnectorBNC, female-to-female, panel-mount bulkhead

This is a passive assembly with no active device in the signal path. THD and noise-floor figures (≤ 0.001% / ≤ −120 dBV, reported on request) are null-result measurements confirming the assembly adds no detectable distortion or noise above a calibrated analyser’s own floor — not a spec the box “achieves” the way an active instrument would.

Typical applications

  • Large modal test arrays and multi-zone structural surveys
  • Aircraft-structure and SHM installations with a high sensor count
  • Projects deciding between the standard screw-fixed build and the chassis-configured option

See current pricing and configuration options on the TIERA store.


Pairs with:

  • Junction Box family — full line-up, configuration matrix and electrical spec
  • JB64T — the chassis-configured build, worked example
  • JB60T — next channel count up
More views
JB48T — 48-Channel BNC Junction Box detail

Want to buy or trial it?

Email Varghese (sales) or book a 20-minute demo call.

Book demo WhatsApp Call