JB16T — 16-Channel BNC Junction Box
16 BNC channels, 2 rows × 8, screw-fixed cover — matched to a 16-channel DAQ.
SKU: JB16T
- ●16 channels, 2 rows × 8
- ●Screw-fixed cover, no hinge — standard T-series build
- ●Rubber bench feet
- ●BNC female-to-female panel-mount, one per channel
- ●±0.1 dB flatness, 10 Hz–20 kHz
- ●1-year warranty
| Channels | 16 |
| Panel layout | 2 rows × 8 |
| Form factor | T-series bench, screw-fixed cover |
| Connector | BNC, female-to-female, panel-mount, ×16 |
| Cover | Screw-fixed flat top panel, no hinge — screw pattern visible, exact count not recounted |
| Mounting | Rubber bench feet |
| Cable glands | Not visible in this model's source image (side wall not shown) — sized to the cable bundle, confirmed at order engineering |
| Footprint | Bench enclosure (indicative — not a measured dimension) |
| Flatness | ±0.1 dB, 10 Hz – 20 kHz |
| Contact resistance | ≤ 5 mΩ |
| Insulation resistance | ≥ 1000 MΩ |
| Warranty | 12 months |
The JB16T panel carries channels 01–16 across two rows of eight, on the same screw-fixed, flat top panel as the rest of the studio-rendered T-series models. The legend and construction match every other bench model in the family: TIERA logo top-left, model code and serial top-right, 16 CHANNEL JUNCTION BOX along the lower edge.
Sixteen channels is a common acquisition-system size — this model pairs naturally with a single 16-channel DAQ, keeping the sensor-to-input mapping one-to-one without splitting an array across two boxes.
Electrical specification
| Parameter | Value |
|---|---|
| Flatness | ±0.1 dB, 10 Hz – 20 kHz |
| Contact resistance | ≤ 5 mΩ |
| Insulation resistance | ≥ 1000 MΩ |
| Connector | BNC, female-to-female, panel-mount bulkhead |
This is a passive assembly with no active device in the signal path. THD and noise-floor figures (≤ 0.001% / ≤ −120 dBV, reported on request) are null-result measurements confirming the assembly adds no detectable distortion or noise above a calibrated analyser’s own floor — not a spec the box “achieves” the way an active instrument would.
Typical applications
- Setups built around a 16-channel DAQ
- Modal test grids and microphone arrays in the 16-channel range
- Structural health monitoring point sets
See current pricing and configuration options on the TIERA store.
Pairs with:
- Junction Box family — full line-up, configuration matrix and electrical spec
- PhonoVibe HD — 16-channel DAQ, matched one-to-one with this panel
- JB12T · JB24T — neighbouring channel counts
-
JB04T — 4-Channel BNC Junction Box The smallest box in the family — 4 BNC channels in a single row, screw-fixed cover. -
JB08T — 8-Channel BNC Junction Box 8 BNC channels, 2 rows × 4, screw-fixed cover — a compact bench routing panel. -
JB12T — 12-Channel BNC Junction Box 12 BNC channels, 2 rows × 6, screw-fixed cover, two cable glands — the family's most fully photographed model. -
JB24T — 24-Channel BNC Junction Box 24 BNC channels, 3 rows × 8, screw-fixed cover — the largest standard bench layout in the family. -
JB48T — 48-Channel BNC Junction Box 48 BNC channels, 4 rows × 12, screw-fixed as standard — chassis build available. -
JB60T — 60-Channel BNC Junction Box 60 BNC channels — a chassis build is also available above 32 channels. - JB64T — 64-Channel BNC Junction Box, Tender Configuration 64 BNC channels, 4 zones × 16, hinged lockable lid, castor stand — built to a customer tender specification.
-
JB80T — 80-Channel BNC Junction Box 80 BNC channels, 5 rows × 16, screw-fixed as standard — the largest model in the family.
Want to buy or trial it?
Email Varghese (sales) or book a 20-minute demo call.